PRE-ORDER | OrangeStorm Giga

$4,218.99 CAD $3,374.99 CAD
Shipping calculated at checkout.

Pre-order Info

Estimated Shipping Date from CA Warehouse: December 15th

  • Gigantic 800mm x 800mm x 1000mm Build Volume
  • Efficient Heated Bed
  • Fast Printing
  • Multi-Nozzle Printing
  • Powerful Cooling Fan
Shipping Note
  • Due to the machine's size, it will be shipped via freight, with an expected delivery time of 7-14 workdays.
  • The freight carrier will contact you by phone, so please ensure your phone number is accurate and remain available for communication once the shipment is dispatched.
  • Separately purchased Giga accessories will be shipped separately and are expected to ship by January 15th.
  • Free Shipping
  • 1-Year Warranty
  • 14 Days Return
  • Lifetime Support
Product information

Where We Ship

Orders placed on ELEGOO CA (ca.elegoo.com) can be shipped to Canada.

Estimated Delivery Time:

  1. In-stock Product: 3-7 workdays for delivery.
  2. Pre-owned Product: 4-8 workdays for delivery.
  3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays.

Shipping Restrictions

  • Please note that we are unable to ship to P.O. Boxes and APO/FPO addresses.
  • You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.

Shipping Fees

For orders over $65 CAD, it’s FREE SHIPPING. Orders under $65 CAD will be charged a $20 CAD shipping fee. EXCEPT this condition:

Orders including Saturn 4 or Saturn 4 Ultra will be charged $30 CAD/pc shipping fees.

Ownership, Terms, and Risk

Please ensure your address details are correct as once the parcel is on its way we cannot re-direct it. It is your responsibility to check and verify. Should any loss be incurred due to the input of an incorrect address or a fraudulent transaction, you will be held responsible as the sole bearer of the pecuniary loss.

Note: Please do not enter any PO Box address, otherwise your package can’t be dispatched by any express.

Normally the orders that have been shipped out (you have received the tracking number or your order status has been completed) cannot be canceled. If you have to refuse delivery due to force majeure after the package is dispatched from ELEGOO, you are subject to the return and refund policies and must pay for the original shipping charges, which will be deducted from your refund.

If you do not contact the delivery company within 5 days after the delivery attempt, they may return the goods to us. A return charge may be assigned to us which may be twice of the delivery cost. If the case of this happens, we reserve the right to ask you to pay the return charge plus an additional re-delivery cost before we re-dispatch the item to you.

When the goods are delivered, please check that the order is complete and undamaged. If there is any damage to the goods at the point of delivery, you can contact us: info@elegoo.com

Following a successful transaction you will be notified when your order has been dispatched with a tracking number provided, if you do not receive a tracking number within 48 hours of completing your purchase, we ask that you first check your email “Junk/Spam” folder and then contact us: info@elegoo.com

Refund Policy & Warranty Info

Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the warranty policy below, as warranty periods and warranty rules differ according to the models and parts list.

 

Warranty Policy

1. Warranty timeline

Models Parts List Warranty Period
3D Printing Related Products

Neptune 3

Neptune 3 Pro/3 Plus/3 Max

Neptune 4/4 Pro/4 Plus/4 Max

OrangeStorm Giga

PEI Platform Plate, Nozzle, Heater, Thermistor, PTFE Tube, Tools No Warranty
Hot End 3 Months
Extruder Kit 6 Months
Main Parts of the Machine 12 Months
Jupiter Release Film, Tools No Warranty
LCD Screen 3 Months
Resin Tank, Build Plate 6 Months
Other Main Parts of the Machine 12 Months
Mars 2/2 Pro/3/3 Pro/4/4 MAX/4 DLP/4 Ultra/5/5 Ultra

Saturn S/Saturn 2/Saturn 8K/3/3 Ultra/4/4 Ultra

Jupiter SE
Release Film, Tools No Warranty
LCD Screen, Resin Tank, Build Plate 6 Months
Other Main Parts of the Machine (FEP&Tools Excluded) 12 Months
Mercury
Mercury Plus V1.0/V2.0/V3.0
Mercury X/XS Bundle
Main Parts of the Machine (Tools Excluded) 12 Months
PHECDA LASER
ENGRAVER &
CUTTER-
10w/20W
Main Parts PCB, Motor, Laser head, Power Adapter 12 Months
Other Parts① Fans 6 Months
Other Parts② Synchronous belt, motor connection line, laser connection line 3 Months
Consumables and
Other attached
Power cord, USB cable, Engraving Material (filter cartridge, wood board, stainless steel sheet, leather, etc.), user manual, packaging, tools (hexagonal wrench, open-end wrench), etc. No Warranty
Arduino Kits, Robot Kits & Component Kits All All 12 Months
Pre-owned Products All All No Warranty
Accessories (For individual purchases) Release Film:FEP/PFA/ACF Release film is a consumable product without warranty No Warranty
LCD Screen:
Mars/Jupiter
Resin leakage, scratch-resistant film damage, human damage, collision damage are not included in the warranty. 3 Months

LCD Screen:
Mars 2/2 Pro/3/3 Pro/4/4 Ultra/4 Max/5/5 Ultra

Saturn /S/2/8K/3/3 Ultra/4/4 Ultra

Jupiter SE

Resin leakage, scratch-resistant film damage, human damage, collision damage are not included in the warranty. 6 Months
Build Plate Damage caused by scratches, drops or bumps is not covered by the warranty. 6 Months
Resin Tank Installation tools and screws are not warranted 6 Months
Air Purifier:
Mini/USB/Mars Mate
Consumables (activated carbon) are not warranted, as well as human damage, disassembly is not covered by the warranty. 12 Months
Mini Heater Consumables (activated carbon) are not warranted, as well as human damage, disassembly is not covered by the warranty. 12 Months
Washing Bucket:Mercury Plus V1.0/ V2.0Mercury X/XS Bundle No warranty for damage caused by man / misuse (e.g. resin curing inside the bucket). 6 Months
3D Stainless Steel Funnel 3D Stainless Steel Funnel is a consumable product without warranty No Warranty
PEI Platform Kit/PEI Magnetic Platform Kit PEI Platform Kit is a consumable product without warranty No Warranty
Nozzle Kit Nozzle Kit is a consumable product without warranty No Warranty
PTFE Tube PTFE Tube is a consumable product without warranty No Warranty
Hotend Kit Hotend Kit (Nozzle, PTFE Tube Excluded) 3 Months
Extruder Kit/Printhead Kit Entire Dual-Gear Direct Extruder Kit 6 Months
Cooling Fan Kit Including 4010/4015 Blower Fan and 6010 Axial Flow Fan 12 Months
STM 32-bit Silent Motherboard Motherboard 12 Months
Enclosure All 12 Months
Dual Printhead Mounting Plate All 12 Months
Four-Printhead Mounting Plate All 12 Months
5KG Large Spool Holder Kit All 12 Months
Camera All 12 Months
Filament Vacuum Storage Bags Kit The pump is guaranteed for 1 month and the vacuum bag is a consumable product without warranty. 1 Month
Rotary Attachment:
PHECDA Laser Engraver
All 12 Months
10W/20W Air Assist:PHECDA Laser Engraver All 12 Months
Enclosure:PHECDA Laser Engraver All 12 Months
Honeycomb Panel:
PHECDA Laser Engraver
Honeycomb Panel is a consumable product without warranty No Warranty
Raisers:PHECDA Laser Engraver All 12 Months
Composite Filter:PHECDA Laser Engraver Composite Filter is a consumable product without warranty No Warranty
10W/20W Laser Module:PHECDA Laser Engraver All 12 Months
Window Mirror:PHECDA Laser Engraver Window Mirror is a consumable product without warranty No Warranty
20W Adapter:PHECDA Laser Engraver All 12 Months
Metal Business Cards All No Warranty
Silicone Mat All No Warranty

2. Warranty Rules for Laser Head and Tube

  1. Laser Head WarrantyRules:
      The rate of laser power drop is related to the frequency of use, working hours, and working environment.
    Laser Tube Warranty Rules:

a). If the laser tube is found to be damaged during the first unpacking inspection, after-sales warranty service can be provided normally;

b). During the warranty period, if the laser tube cannot emit light normally, but no obvious appearance defects are found, after-sales warranty services can be provided normally;

c). During the warranty period, if the laser tube has any appearance cracks (including but not limited to cracks caused by improper handling or cracks caused by freezing temperatures), after-sales warranty services can't be provided normally.

 

3. Warranty Period

All times shown on this page are calculated from the date the original order was received. If you receive free replacement products or accessories, the warranty period will still be calculated from the date the original order was received.

4. Warranty Forfeiture

The following Conditions Are Not Covered Under Warranty:

  1. Products without sufficient proof of purchase
  2. Lost or stolen products
  3. Items that have expired their warranty period
  4. Non-quality-related issues (after 30 days of purchase)
  5. Free products
  6. Repairs through 3rd parties
  7. Damage from outside sources
  8. Damage from misuse of products (including, but not limited to: falls, extreme temperatures, water, and operating devices improperly)
  9. Purchases from illegitimate resourcesor second-handed parties
  10. Normal discoloration, wear, or consumption during product use.

 

Return & Refund Policy

1. For Unwanted Items
*This clause does not apply to Pre-owned & Refurbished items.

If the Elegoo product that you purchased does not meet your satisfaction but was not confirmed defective by certified Elegoo technicians, we call such product as “unwanted product”.

 

  1. For products in condition unopened (all original tags and labels attached), within 14 days of delivery, you may return them with an "unwanted reason" and get a refund. You are responsible for the shipping fees, and ELEGOO will charge a 5% restocking fee based on the order amount.
  2. For products in condition open-box and unused, within 14 days of delivery, you may return them with an "unwanted reason" and get a refund. You are responsible for the shipping fees, and ELEGOO will charge a 15% restocking fee based on the order amount.
  3. For used products or orders beyond 14 days, refunds for unwanted products are not available.

     

    Unwanted Issue

     

    Product Status

    Items

    Responsibility of Return Shipping Charges

    Restocking Fee

    Deduction Fee

    Refund

    Within 14 Days

    Unopened

    Customer

    5% based on the order amount

    If the returned machine detects key parts missing, the corresponding fees will be deducted.

    Open-box and unused

    Customer

    15% based on the order amount

    Used

    ×

    ×

    ×

    Within Warranty

    All Status

    ×

    ×

    ×

    ×

     

    Important: After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.

    For your own benefit, we recommend that you use a traceable carrier that can provide you with the delivery confirmation to ship your Product for refund back to the location instructed in the RMA authorization. Elegoo shall not be responsible for any loss or damage to the returning product caused in transit.

     

    The returning product will be thoroughly inspected by Elegoo when received and a decision will be made whether the inspection criteria are met. If your returning product fails to satisfy the inspection criteria and has been shipped to Elegoo, your non-conforming product for refund will be rejected or subject to a deduction fee at Elegoo’s sole discretion.

     

    After the 14-day refund window has expired, your only recourse regarding the products is through our warranty.

    2. For Quality-Related Items
    *This clause does not apply to Pre-owned & Refurbished items.

    1. Product is defective when you receive it, within 14days of delivery, you can return defective items to Elegoo and get a full refund or replacement, and Elegoo is responsible for return shipping charges. Or you can ask Elegoo to repair defective items, and Elegoo is responsible for repair fees.
    2. Beyond the 14days but within warranty, a full refund and replacement are not available, but repair is acceptable. Elegoo is responsible for repair fees.
    3. Out of warranty, Elegoo will provide free technical support, if the parts need to be replaced, the customer is responsible for the repair fees, which means the customer needs to purchase the parts and bear the freight.

     

    Quality-Related Issue

     

    Items

    Responsibility of Fees

    Refund

    Replace

    Repair

    Return Shipping Charges

    Repair Fees

    Within 14 Days

    Elegoo

    Elegoo

    Within Warranty

    ×

    ×

    ×

    Elegoo

    Out of Warranty

    ×

    ×

    ×

    Customer

    Important: 1. After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.

    2. To avoid any delay or denial of processing your refund and replacement request, please verify that the returning product must be with all parts & accessories included and all original tags and labels attached and in the original box (generic boxes will be rejected).

    3. Process After Returning Product

    After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least 7 days from the receipt of your item to process your return. We will notify you by email when your return has been processed and move to the next warranty process, refund you the payment via Paypal, or send a new replacement to you.

     

    Contact Us

    Regarding product issues, please don't hesitate to contact us at the customer service channels below to acquire technical support, refund or exchange.

     

    1. For 3D Printertechnical support: 3dp@elegoo.com 
    2. Forlaser engraver technical support: lec@elegoo.com
    3. For order issues, unwanted item refunds, or returns: info@elegoo.com
    4. For STEM kits, robots technical support: service@elegoo.com

     

    When contacting our customer service team, the buyer must provide sufficient proof of purchase (the order number from online purchases made through ELEGOO, Amazon, or other ELEGOO's authorized resellers), tell us which product you purchased, and describe the problem as clearly as possible through text, images or short videos. This will help our team to process your inquiries and help you solve the problems more efficiently.

     

    Gigantic in Size

    With a build volume of 800mm x 800mm x 1000mm, the industrial-grade FDM printer not only meets the user's printing needs for oversized models, but also reduces the need to cut models into smaller sections for efficient printing.

    *To better understand how large this printer is: Video or 3D Model Mockup of Giga.

    Efficient Heated Bed

    The heated bed consists of four independent (410*410mm) PEI magnetic high-temperature platforms with a maximum temperature of 100°C.

    The four platforms can be heated simultaneously to reach 100°C over the entire area in 17 minutes (Ambient temperature: 25℃).

    The platform where the model is located can also be automatically recognized and heated independently, or manually and independently controlled for increased energy efficiency.

    Fast Printing

    Utilizing a 64-bit 1.5G clock speed quad-core high-performance processor (SOC RK3328), it provides sufficient computing capacity while delivering 6 times the printing speed, with a maximum speed of 300mm/s (150mm/s recommended), which is the top end print speed for printers of its size.

    Multi -Nozzle Printing

    Three additional printheads can be added to the X-axis to realize simultaneous printing with four nozzles, supporting printing four of the same model,while each nozzle can be equipped with the same material and different color filament to achieve four different colored models of the same kind.

    Powerful Cooling Fan

    Thickened double-sided cooling fans can comprehensively enhance the model printing results. In addition, the fans are equipped with an intelligent control function that stops working when printing is complete, which saves energy and reduces noise as well as prolongs the lifespan. (5015 ball blower fan*2, 4010 ball axial fan*1)

    High-Quality Craftsmanship

    Integrated body, elegant yet durable. The X-axis and Y-axis are linear guides, effectively improving printing stability and increasing lifespan. The Z-axis features an upgraded version of the Z-Axis rod to make the machine run smoothly and ensure leveling precision. Machine mounts are designed with a carbon steel round base and rubber round anti-slip pad bottom.

    Upgraded Nozzle

    The upgraded 300℃ high-temperature nozzle adopts a proximal double-gear extrusion structure and full titanium alloy heat pipe. Plus, the nozzle is upgraded to chrome zirconium copper with a 60W ceramic heating pad for smoother and more uniform extrusion, which improves the printing precision. 
    In addition, the nozzle PID auto-calibration function provides more precise control of the nozzle temperature and the built-in acceleration sensor automatically calibrates resonance compensation parameters to further ensure print quality and enhance your printing experience.
    Nozzle Diameter (included): 0.6mm  
    Nozzle Diameter (optional): 0.4mm/ 0.8mm/ 1mm

    Adopting one-click automatic leveling and a non-contact high-precision sensor to automatically collect 121-point (10*10) of platform data to ensure the platform is level.

    The cables on the body are stored in caterpillar cable tracks, which prevents the cables from being worn or broken and you don’t have to worry about them affecting your prints. Furthermore, it prevents dust and other debris from entering the cables, ensuring the stability and reliability of the entire system.

    No more worrying about being interrupted while printing. When there is a broken filament or no filament, the machine automatically sounds an alarm and pauses printing. Whether it's broken filament, no filament, power outage, or a manual pause in printing, you can resume printing again.

    The 7-inch HD capacitive screen can be detached from the body for handheld operation while supporting ELEGOO Cura model preview and switching between eight languages.

    The X/Y axis belt is used to transmit the power of the motor and control the movement of the print head on the plane. The knobs design can easily and accurately control the tightness of the belt to obtain the best printing effect.

    Crafted from high-quality sheet metal, our spool holder can accommodate filament spools up to 5kg with ease. Its compact and sturdy design ensures that your large-scale printing projects receive reliable and consistent support throughout the printing process.

    What's In Box

    Show More(12+)

    Specification

    Product Model

    OrangeStorm Giga

    Printing Technology

    FDM (Fused Deposition Modeling)

    Voltage

    100-120V/220-240V

    File Transfer Method

    USB, LAN, WIFI

    File Format

    STL, OBJ

    UI Language

    English, French, German, Russian, Italian, Spanish, Japanese, Chinese

    Build Volume

    800 x 800 x 1000 mm³

    Printing Platform Size (PEI Area)

    820 x 820 mm²
    (4 independent 410 x 410 mm² PEI plates)

    Machine Size

    1224 x 1164 x 1425 mm³

    Package Size

    Bottom + XY Axis Components: 1350 x 1215 x 420 mm³
    Two Z-Axis Components: 1350 x 1215 x 350 mm³

    MAXIMUM SIZE FOR MACHINE ACTIVITY/MM

    1224 x 1520 x 1570

    Max. Nozzle Temperature

    300°C

    Max. Hot bed Temperature

    100°C (ambient temperature: 25°C)

    Filament Compatibility

    PLA / PETG / TPU

    Net Weight

    104kg

    Gross Weight

    145kg

    Resume Printing

    Yes

    Filament Detection

    Yes

    Max Speed of Tool Head

    300 mm/s

    Max Acceleration of Tool Head

    5,000 mm/s²

    Show More(14+)
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer

    FAQs

    How long does delivery take after shipping?

    1. In-stock Product: 3-7 workdays for delivery

    2. Pre-owned Product: 4-8 workdays for delivery

    3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays for delivery.

    What countries do you ship to?

    Orders placed on ELEGOO CA (ca.elegoo.com) can be shipped to Canada.

    Do you offer free shipping service?

    Click to view shipping Fees.

    Can I change the delivery address of my package after it has been shipped out?

    Unfortunately, we cannot change the shipment once the product is shipped.