PRE-ORDER | Centauri Carbon + 5KG Carbon Fiber PLA

$599.94 CAD $579.94 CAD
Shipping calculated at checkout.

Pre-order Shipping Notice

Estimated Shipping Date from CA Warehouse

Centauri Carbon: August 10, 2025
PLA-CF: May 31, 2025

Click here for detailed shipping times by batch.

  • Print Right Out of the Box
  • Full-Auto Calibration
  • CoreXY with 500 mm/s Velocity
  • 20,000 mm/s² Acceleration
  • Unleash Creativity with Every Filament
  • Chamber Camera Acts as Your Eyes
  • Build Volume 256 × 256 × 256 mm
  • Lifetime Support
  • 1-Year Warranty
  • 14 Days Return
Product information

Where We Ship

Orders placed on ELEGOO CA (ca.elegoo.com) can be shipped to Canada.

Estimated Delivery Time:

  1. In-stock Product: 3-7 workdays for delivery.
  2. Pre-owned Product: 4-8 workdays for delivery.
  3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays.

Shipping Restrictions

  • Please note that we are unable to ship to P.O. Boxes and APO/FPO addresses.
  • You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.

Shipping Fees

For orders over $65 CAD, it’s FREE SHIPPING. Orders under $65 CAD will be charged a $20 CAD shipping fee. EXCEPT this condition:

Orders that include Saturn 4, Saturn 4 Ultra, or Saturn 4 Ultra 16K will incur a shipping fee of $30 CAD per unit.

Orders that include Centauri or Centauri Carbon will incur a shipping fee of $50 CAD per unit.

Ownership, Terms, and Risk

Please ensure your address details are correct as once the parcel is on its way we cannot re-direct it. It is your responsibility to check and verify. Should any loss be incurred due to the input of an incorrect address or a fraudulent transaction, you will be held responsible as the sole bearer of the pecuniary loss.

Note: Please do not enter any PO Box address, otherwise your package can’t be dispatched by any express.

Normally the orders that have been shipped out (you have received the tracking number or your order status has been completed) cannot be canceled. If you have to refuse delivery due to force majeure after the package is dispatched from ELEGOO, you are subject to the return and refund policies and must pay for the original shipping charges, which will be deducted from your refund.

If you do not contact the delivery company within 5 days after the delivery attempt, they may return the goods to us. A return charge may be assigned to us which may be twice of the delivery cost. If the case of this happens, we reserve the right to ask you to pay the return charge plus an additional re-delivery cost before we re-dispatch the item to you.

When the goods are delivered, please check that the order is complete and undamaged. If there is any damage to the goods at the point of delivery, you can contact us: info@elegoo.com

Following a successful transaction you will be notified when your order has been dispatched with a tracking number provided, if you do not receive a tracking number within 48 hours of completing your purchase, we ask that you first check your email “Junk/Spam” folder and then contact us: info@elegoo.com


Refund Policy & Warranty Info

Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the warranty policy below, as warranty periods and warranty rules differ according to the models and parts list.

 

Warranty Policy

1. Warranty timeline

Models
Parts List
Note
Warranty Period
3D Printing Machine & Parts
Neptune 3/3 Pro/3 Plus/3 Max

Neptune 4/4 Pro/4 Plus/4 Max

OrangeStorm Giga

Centauri Carbon/Centauri
PEI Platform Plate/PEI Platform Kit/PEI Magnetic Platform Kit/Build Plate
The PEI platform/build plate is a consumable product without warranty.
No warranty
Nozzle
The nozzle kit is a consumable product without warranty.
No warranty
PTFE Tube
The PTFE tube is a consumable product without warranty.
No warranty
Heater, Thermistor, Tools
No warranty
Hot End/Hotend Kit
The nozzle and PTFE tube are consumable products without warranty.
3 Months
Extruder/Extruder Kit/Printhead Kit
6 Months
Cooling Fan Kit
This includes the 4010/4015 blower fan and the 6010 axial flow fan.
12 Months
STM 32-bit Silent Motherboard
12 Months
Main Parts of the Machine
12 Months
Mars/Jupiter
Release Film, Tools
The release film is a consumable product without warranty.
No warranty
LCD Screen
Resin leakage, scratch-resistant film damage, human damage, and collision damage are not included in the warranty.
3 Months
Resin Tank
Installation tools and screws are not warranted.
6 Months
Build Plate
Damage caused by scratches, drops, or bumps is not covered by the warranty.
6 Months
Other Main Parts of the Machine
12 Months
Mars 2/2 Pro/3/3 Pro/4/4 MAX/4 DLP/4 Ultra/5/5 Ultra

Saturn S/2/8K/3/3 Ultra/4/4 Ultra/4 Ultra 16K

Jupiter SE
Release Film, Tools
The release film is a consumable product without warranty.
No warranty
LCD Screen
Resin leakage, scratch-resistant film damage, human damage, and collision damage are not included in the warranty.
6 Months
Resin Tank
Installation tools and screws are not warranted.
6 Months
Build Plate
Damage caused by scratches, drops, or bumps is not covered by the warranty.
6 Months
Other Main Parts of the Machine (FEP & Tools Excluded)
12 Months
Mercury
Mercury Plus V1.0/V2.0/V3.0
Mercury X/XS Bundle
Washing Bucket, Curing Turntable, Acrylic Cover
No warranty
Other Main Parts of the Machine (Tools Excluded)
No warranty for the Fresnel lens coated with resin.
12 Months
Phecda Laser
Engraver &
Cutter - 10W/20W
Consumables and
Other attached
Window Mirror,Power Cord, USB Cable, Engraving Materials, User Manual, Packaging, Tools
No warranty
Other Parts①
Synchronous Belt, Motor Connection Line, Laser Connection Line
3 Months
Other Parts②
Fans
6 Months
Main Parts①
Laser Head
The rate of laser power drop is related to the frequency of use, working hours, and the working environment. If the laser head has any obvious appearance defects or visible cracks, after-sales warranty services will not be provided.
12 Months
Main Parts②
Air Assist, PCB, Motor, Laser Head, Power Adapter, Raisers
12 Months
Arduino Kits, Robot Kits & Component Kits
All
All
12 Months
Pre-owned Products
All
All
No warranty
Accessories
Air Purifier:
Mini/USB/Mars Mate
All (Activated Carbon Excluded)
Consumables (activated carbon) are not warranted, nor is human damage or disassembly covered by the warranty.
12 Months
Mini Heater
All (Activated Carbon Excluded)
12 Months
3D Stainless Steel Funnel
3D Stainless Steel Funnel is a consumable product without warranty
No warranty
3D Paint Kit
All
No warranty
PEI Liquid Glue
All
No warranty
Anti-Vibration Feet
All
12 Months
Enclosure
All
12 Months
Dual Printhead Mounting Plate
All
12 Months
Four-Printhead Mounting Plate
All
12 Months
5 kg Large Spool Holder Kit
All
12 Months
Camera
All
12 Months
Filament Vacuum Storage Bags Kit
Pump (Vacuum Bags Excluded)
The vacuum bags are consumable products without warranty.
1 Month
Accessories for Phecda
Honeycomb Panel
The honeycomb panel is a consumable product without warranty.
No warranty
Composite Filter
The composite filter is a consumable product without warranty.
No warranty
Rotary Attachment
12 Months
Enclosure
12 Months
Metal Business Cards
All
No warranty
Silicone Mat
All
No warranty


2. Warranty Period

All times shown on this page are calculated from the date the original order was received. If you receive free replacement products or accessories, the warranty period will still be calculated from the date the original order was received.

3. Warranty Forfeiture

The following Conditions Are Not Covered Under Warranty:

A. Product is not from ELEGOO or distributors authorized by ELEGOO
B. Products without purchase receipt or any other sufficient proofs of purchase
C. Lost or stolen products
D. Items that have expired their warranty period
E. Non-quality-related issues (after 30 days of purchase)
F. Free products
G. Repaired by a third party or modified by an individual
H. Damage from outside sources
I. Damage from misuse of products (including, but not limited to: resin leakage, falls, and operating devices improperly)
J. Normal discoloration, wear, or consumption during product use
K. The LCD screen cannot provide an SN code

 

Return & Refund Policy

1. For Unwanted Items
*This clause does not apply to Pre-owned & Refurbished items.

Please note that all return requests must first be submitted to our official customer service team, and the package must be returned to our designated address (unless our customer service team recommends refusing the package), as failure to do so could result in liability for any lost items. Any return not confirmed and monitored by customer support may be lost.

If the Elegoo product that you purchased does not meet your satisfaction but was not confirmed defective by certified Elegoo technicians, we refer to such a product as an "unwanted product".

A. For unopened products (with all original tags and labels attached), you can return them within 14 days of delivery for a refund with an "unwanted reason". Original shipping charges are non-refundable (including free shipping products). Return shipping charges are the customer's responsibility (if ELEGOO provides a shipping label, the shipping fee will be deducted from the refund), and ELEGOO will apply a 5% restocking fee based on the order amount. The refund will be issued in the same currency as the purchase, minus any taxes, import duties, and original shipping charges.

B. For open-box and unused products, within 14 days of delivery, you can return them for a refund with an "unwanted reason". Original shipping charges are non-refundable (including free shipping products). Return shipping charges are the customer's responsibility (if ELEGOO provides a shipping label, the shipping fee will be deducted from the refund), and ELEGOO will apply a 5% restocking fee based on the order amount. The refund will be issued in the same currency as the purchase, minus any taxes, import duties, and original shipping charges.

C. For used products or orders beyond 14 days, refunds for unwanted products are not available.

     

    Unwanted Issue

     

    Product Status

    Items

    Responsibility of Both Original Shipping Charges and Return Shipping Charges

    Restocking Fee

    Deduction Fee

    Refund

    Within 14 Days

    Unopened

    Customer

    5% based on the order amount

    If the returned machine detects key parts missing, the corresponding fees will be deducted.

    Open-box and unused

    Customer

    15% based on the order amount

    Used

    ×

    ×

    ×

    Within Warranty

    All Status

    ×

    ×

    ×

    ×

    Important: 

    1. If the customer service team/technical team confirms the return or exchange of the machine, the original machine must be sent out within 7 days (the return label provided by our company is valid for 7 days). Otherwise, it will be deemed that the plan has been abandoned. Subsequent contact with us will require re-troubleshooting and confirmation of the problem, and the time when the problem first occurred will also be reset. A refund or a new machine will be arranged after we receive the returned machine.

    2. After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.

    3. The returning product will be thoroughly inspected by Elegoo when received and a decision will be made whether the inspection criteria are met. If your returning product fails to satisfy the inspection criteria and has been shipped to Elegoo, your non-conforming product for refund will be rejected or subject to a deduction fee at Elegoo's sole discretion.

    2. For Quality-Related Items

    *This clause does not apply to Pre-owned & Refurbished items.

    Please note that all return requests must first be submitted to our official customer service team, and the package must be returned to our designated address (unless our customer service team recommends refusing the package), as failure to do so could result in liability for any lost items. Any return not confirmed and monitored by customer support may be lost.

    A. Product is defective when you receive it, within 14 days of delivery, you can return defective items to Elegoo and get a full refund or replacement, and Elegoo is responsible for return shipping charges. Or you can ask Elegoo to repair defective items, and Elegoo is responsible for repair fees.

    B. Beyond the 14 days but within warranty, a full refund and replacement are not available, but repair is acceptable. Elegoo is responsible for repair fees.

    C. Out of warranty, Elegoo will provide free technical support, if the parts need to be replaced, the customer is responsible for the repair fees, which means the customer needs to purchase the parts and bear the freight.

     

    Quality-Related Issue

     

    Items

    Responsibility of Fees

    Refund

    Replace

    Repair

    Return Shipping Charges

    Repair Fees

    Within 14 Days

    Elegoo

    Elegoo

    Within Warranty

    ×

    ×

    ×

    Elegoo

    Out of Warranty

    ×

    ×

    ×

    Customer

    Important:

    1. If the customer service team/technical team confirms the return or exchange of the machine, the original machine must be sent out within 7 days (the return label provided by our company is valid for 7 days). Otherwise, it will be deemed that the plan has been abandoned. Subsequent contact with us will require re-troubleshooting and confirmation of the problem, and the time when the problem first occurred will also be reset. A refund or a new machine will be arranged after we receive the returned machine.

    2. After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.

    3. To avoid any delay or denial of processing your refund and replacement request, please verify that the returning product must be with all parts & accessories included and all original tags and labels attached and in the original box (generic boxes will be rejected).

    3. Process After Returning Product

    After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least 7 days from the receipt of your item to process your return. We will notify you by email when your return has been processed and move to the next warranty process, refund you the payment via Paypal, or send a new replacement to you.

     

    Contact Us

    Regarding product issues, please don't hesitate to contact us at the customer service channels below to acquire technical support, refund or exchange.

    For 3D printer technical support: 3dp@elegoo.com
    For laser engraver technical support: lec@elegoo.com
    For pre-sales consulting, payment issues, order issues, invoice issues, delivery problems, unwanted item refunds, or returns: info@elegoo.com
    For STEM kits, robots technical support: service@elegoo.com
    When contacting our customer service team, the buyer must provide sufficient proof of purchase (the order number from online purchases made through ELEGOO, Amazon, or other ELEGOO's authorized resellers), tell us which product you purchased, and describe the problem as clearly as possible through text, images or short videos. This will help our team to process your inquiries and help you solve the problems more efficiently.

    Print Right Out of the Box

    Ease-of-Use

    Redefining Material
    Versatility

    Designed for advanced materials, Centauri Carbon is equipped with a 320 °C brass-hardened steel nozzle and superior cooling within a fully enclosed chamber. It specializes in carbon fiber reinforced filament, allowing you to create strong, lightweight and heat-resistant parts, ideal for aerospace, automotive, and athletic applications.

    Built for High-Speed

    Centauri Carbon redefines speed with its advanced CoreXY motion system, reaching up to 500 mm/s and 20,000 mm/s² acceleration. Its 32 mm³/s flow rate enables rapid creation of larger, intricate designs, while the high-power heated bed ensures quick heat-up for instant printing.

    500

    mm/s

    Velocity

    20,000

    mm/s²

    Acceleration

    32

    mm³/s

    Flow rate

    Integrated Die-Cast
    Design

    We spent extra to bring you the most reliable integrated die-cast aluminum construction, ensuring superior stability and reduced vibrations for high-speed printing. This robust design allows you to achieve faster prints without compromising accuracy or quality.

    Feel the Smoothness

    Achieve a perfect first layer with smooth surfaces and stunning details. Centauri Carbon's automatic vibration compensation and pressure advance ensures extra smoothness, bringing you lightning-fast speed without ringing or ghosting in prints. 

    Before
    After

    Chamber Camera Keeps You in Total Control

    The chamber camera offers real-time monitoring for quick adjustments, minimizing waste and enhancing reliability. The built-in LED light ensures you never miss a moment, while the time-lapse feature makes sharing your creative process a breeze.

    Dual-Sided
    Flexible Plate

    The upgraded dual-sided plate features a new PLA Specific Surface with excellent adhesion and minimal warping, ensuring perfect PLA printing even at lower heatbed temperatures.

    Even More Carefree

    Fan
    self-check

    Power Loss
    Recovery

    Auto Filament Unloading

    Filament Run-Out Detector

    Stay engaged with your printing process in real-time through the sturdy tempered glass door and top cover of the enclosure.

    Count on smooth printing with the semi-automatic belt tensioner that effortlessly maintains optimal tension, reducing vibrations and ensuring unmatched accuracy.

    The heatbed nozzle wiper keeps your nozzle residue-free before each use for flawless prints every time, while the filament waste bin[1] makes post-print cleanup quick and easy.

    Maximize your cooling efficiency with two additional high-performance fans - a powerful auxiliary part cooling fan & a chamber temperature regulator fan, complete with real-time self-checks for optimal performance. Its Nano mineral crystal filter absorbs harmful particles and odors, ensuring a fresh, safe printing environment.

    Achieve outstanding performance with Centauri Carbon's advanced operation system, featuring seamless OTA upgrades, 8G ROM for ample storage, and fast dual-band Wi-Fi for reliable LAN transfers.

    Located on the machine's right side, the filament holder offers convenience for replacing and monitoring filament supply.

    Select Your Ideal Option

    Centauri Carbon

    $579.94

    Learn More

    Centauri

    $349.99

    Learn More
    Body
    Body
    Shell
    Shell
    Enclosed (Metal & Glass)
    Open Frame
    Chassis
    Chassis
    Die-Cast Aluminum
    Die-Cast Aluminum
    Printing Specifications
    Printing Specifications
    Max Printing Speed
    Max Printing Speed
    500 mm/s
    500 mm/s
    Max Acceleration
    Max Acceleration
    20,000 mm/s²
    20,000 mm/s²
    Max Hotend Flow
    Max Hotend Flow
    32 mm³/s
    32 mm³/s
    Printing Accuracy
    Printing Accuracy
    ±0.1 mm
    ±0.1 mm
    Layer Thickness
    Layer Thickness
    0.1-0.4 mm (recommended 0.2 mm)
    0.1-0.4 mm (recommended 0.2 mm)
    Leveling Method
    Leveling Method
    Auto-Leveling
    Auto-Leveling
    Build Volume (W × D × H)
    Build Volume (W × D × H)
    256 × 256 × 256 mm
    256 × 256 × 256 mm
    Supported Filament
    Supported Filament
    Carbon/Glass Fiber Reinforced
    Filaments/PLA/PETG/ABS/ASA/TPU/PET/PC/PA
    PLA/PETG/TPU/ABS/ASA
    Sensors
    Sensors
    Chamber Monitoring Camera
    Chamber Monitoring Camera
    Yes
    -
    Filament Run Out Sensor
    Filament Run Out Sensor
    Yes
    Yes
    Power Loss Recovery
    Power Loss Recovery
    Yes
    Yes
    Hardware
    Hardware
    Extruder
    Extruder
    Hardened Steel Dual-Gear Direct Extruder
    Hardened Steel Dual-Gear Direct Extruder
    Nozzle
    Nozzle
    0.4 mm Brass-Hardened Steel Nozzle (Included)
    0.2/0.6/0.8/1.0 mm (Optional)
    0.4 mm Brass-Hardened Steel Nozzle (Included)
    0.2/0.6/0.8/1.0 mm (Optional)
    Hot End
    Hot End
    All-Metal
    All-Metal
    Max Hot End Temperature
    Max Hot End Temperature
    320 °C
    320 °C
    Build Plate
    Build Plate
    PLA Specific & Textured PEI Dual-Sided Plate
    PLA Specific & Textured PEI Dual-Sided Plate
    Max Heated Bed Temperature
    Max Heated Bed Temperature
    110 °C
    100 °C
    Filament Cutter
    Filament Cutter
    Yes
    Yes
    Touch Screen
    Touch Screen
    4.3-inch Capacitive Touch Screen
    4.3-inch Capacitive Touch Screen
    Cooling & Filtration
    Cooling & Filtration
    Fan
    Fan
    Part Cooling Fan
    Hot End Fan
    Auxiliary Part Cooling Fan
    Chamber Temperature Regulator Fan
    Part Cooling Fan
    Hot End Fan
    Air Filter
    Air Filter
    Activated Carbon Filter
    -
    System
    System
    Connectivity
    Connectivity
    USB & Wi-Fi
    USB & Wi-Fi
    OTA Firmware Upgrade
    OTA Firmware Upgrade
    Yes
    Yes
    Language
    Language
    English, French, German, Russian, Italian, Spanish, Japanese, Chinese
    English, French, German, Russian, Italian, Spanish, Japanese, Chinese
    Slicing Software
    Slicing Software
    ELEGOO Slicer (Recommended), Orca, Cura
    ELEGOO Slicer (Recommended), Orca, Cura
    Input Format
    Input Format
    STL, OBJ, 3MF, STP
    STL, OBJ, 3MF, STP
    Output Format
    Output Format
    Gcode
    Gcode
    Size & Weight
    Size & Weight
    Printer Dimensions
    Printer Dimensions
    398 × 404 × 490 mm
    398 × 404 × 490 mm
    Net Weight
    Net Weight
    17.5 kg
    14 kg
    Gross Weight
    Gross Weight
    21 kg
    17 kg
    Power Requirements
    Power Requirements
    Input Voltage
    Input Voltage
    100-240 VAC, 50/60 Hz
    100-240 VAC, 50/60 Hz
    Max Power
    Max Power
    1100W@220V, 350W@110V
    1100W@220V, 350W@110V

    What's in Box

    Notice:
    1. Customers are required to print the filament waste bin themselves as it is not included in the packaging. The model for printing will be available on the provided USB drive or within the machine.

    FAQs

    How long does delivery take after shipping?

    1. In-stock Product: 3-7 workdays for delivery

    2. Pre-owned Product: 4-8 workdays for delivery

    3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays for delivery.

    What countries do you ship to?

    Orders placed on ELEGOO CA (ca.elegoo.com) can be shipped to Canada.

    Do you offer free shipping service?

    Click to view shipping Fees.

    Can I change the delivery address of my package after it has been shipped out?

    Unfortunately, we cannot change the shipment once the product is shipped.