• Fast Shipping
  • Up To 1-Year Warranty
  • Lifetime Support
Hot

Saturn 4 Ultra

$723.99 CAD $499.00 CAD
Ends in  10 Days
08:
52:
15
Shipping calculated at checkout.
  • Innovative Tilt Release Technology
  • 10-inch 12K Mono LCD
  • COB + Fresnel Collimating Lens
  • Auto Leveling & Intelligent Mechanical Sensor
  • AI Intelligent Monitoring & Power-Loss Resume Printing
Options:Saturn 4 Ultra
Saturn 4 Ultra
Saturn 4 Ultra Combo with Air Purifier
Saturn 4 Ultra Combo with Mercury XS
Saturn 4 Ultra Complete Bundle - Mercury Plus V3.0 & Resin
Saturn 4 Ultra Starter Bundle - Release Film & Resin
  • Fast Shipping
  • Up To 1-Year Warranty
  • Lifetime Support
Saturn 4 Ultra
$723.99 CAD $499.00 CAD
$723.99 CAD $499.00 CAD
Product information

Where We Ship

Orders placed on ELEGOO CA (ca.elegoo.com) can be shipped to Canada. 

Estimated Delivery Time:

  1. In-stock Product: 3-7 workdays for delivery.
  2. Pre-owned Product: 4-8 workdays for delivery.
  3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays.

1. Once the package has been dispatched, please promptly monitor its status. If you encounter any of the following situations, please contact us immediately to prevent exceeding the logistics channel's tracing period: the package status remains unchanged for over 7 days, or if the package has been signed for but not received by you.
2. Upon receiving the goods, please ensure that the order is complete and undamaged. For any logistics inquiries, feel free to reach out to us without delay.

Contact Information:
A. If you have opted for Worry-Free Delivery, you will receive an email from Seel. In case of lost, stolen, or damaged products due to logistics issues, please report these concerns via the Seel email or seek assistance by contacting them.
B. If you have not chosen Worry-Free Delivery, you can contact us at info@elegoo.com. We will coordinate with the logistics company to verify the situation and assist you in filing a claim if necessary.

Shipping Restrictions

  • Please note that we are unable to ship to P.O. Boxes and APO/FPO addresses.
  • You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.

Shipping Fees

For orders over $65 CAD, it’s FREE SHIPPING. Orders under $65 CAD will be charged a $20 CAD shipping fee. EXCEPT this condition:

Orders that include Saturn 4, Saturn 4 Ultra, or Saturn 4 Ultra 16K will incur a shipping fee of $30 CAD per unit.

Orders that include Centauri or Centauri Carbon will incur a shipping fee of $50 CAD per unit.

Ownership, Terms, and Risk

1. Please ensure your shipping address is accurate. Once the package is dispatched, we cannot reroute it. You are solely responsible for verifying the address. If a loss occurs due to an incorrect address or a fraudulent transaction, you will be liable for all financial losses.
Note: Please do not enter any PO Box address, otherwise your package can't be dispatched by any courier services.

2. Orders (excluding Pre-Orders) are typically forwarded to the warehouse 8 hours after placement. Once submitted to the warehouse, orders are generally non-cancellable and non-modifiable. If modifications are required, we will attempt to coordinate with the warehouse; however, success cannot be guaranteed. Costs incurred due to address errors or cancellations are subject to our Return & Refund Policy, and you will be responsible for payment.

3. Please ensure all order details are accurate and your phone is accessible. If a product is returned due to the following reasons, we reserve the right to charge return shipping fees and redelivery costs prior to resending the item:
A. Failure to contact the delivery carrier within 5 days of a delivery attempt.
B. Incorrect shipping address provid

FAQ

Q: If I order multiple products, will they be delivered together?
A: We aim to ship items together whenever possible. However, depending on product availability or shipping requirements, items may arrive separately. You will receive a notification email for each shipment.


Warranty Periods

Category
Models
Parts List
Note
Warranty Period
All
/
/
Consumable parts with no warranty or limited warranty.
12 Months
3D Printing Machine & Parts
Neptune 3/3 Pro/3 Plus/3 Max

Neptune 4/4 Pro/4 Plus/4 Max

OrangeStorm Giga

Centauri Carbon/Centauri
PEI Platform Plate/PEI Platform Kit/PEI Magnetic Platform Kit/Build Plate/Nozzle (Kit)/PTFE Tube/Tools
Consumable parts with no warranty.
No Warranty
Extruder/Extruder Kit/Printhead Kit
Consumable parts with limited warranty.
6 Months
Mars/Mars 2/2 Pro/3/3 Pro/4/4 MAX/4 DLP/4 Ultra/5/5 Ultra

Saturn S/2/8K/3/3 Ultra/4/4 Ultra/4 Ultra 16K

Jupiter/Jupiter SE
Release Film, Tools
Consumable parts with no warranty.
No Warranty
LCD Screen
Consumable parts with limited warranty. Resin leakage, scratch-resistant film damage, human-caused damage, and collision damage are not covered by the warranty.
3 Months
Resin Tank/Build Plate
Consumable parts with limited warranty.
6 Months
Mercury
Mercury Plus V1.0/V2.0/V3.0
Mercury X/XS Bundle
Washing Bucket, Curing Turntable, Acrylic Cover
Consumable parts with no warranty.
No Warranty
Phecda Laser
Engraver & 
Cutter - 10 W/20 W
Consumables and
Other Attached
Window Mirror, Power Cord, USB Cable, Engraving Materials, User Manual, Packaging, Tools
Consumable parts with no warranty.
No Warranty
Other Parts①
Synchronous Belt, Motor Cable, Laser Cable
Consumable parts with limited warranty.
3 Months
Other Parts②
Fans
Consumable parts with limited warranty.
6 Months

 

1. Consumable Parts 
Consumable parts are either excluded from warranty coverage or covered under a limited warranty period. For the purpose of this policy, "consumables" are defined as disposable items, components, or parts of the Product that are inherently designed to deteriorate or wear out during normal use of the Product.

While these items may not be covered by the standard warranty or may have a limited warranty period as specified in the table above, we will gladly replace any consumable that fails due to a manufacturing defect, provided the printer itself is still under warranty. ELEGOO reserves the exclusive right to determine eligibility for replacement, and such decisions shall be final.

2. Accessories or Parts Purchased Separately
Accessories or parts purchased separately enjoy the same quality assurance policy as the complete machine.

3. Warranty Periods
All periods stated on this page are calculated from the date the original order was received. 

4. Warranty Forfeiture
This warranty does not cover the following cases:
A. Products not purchased from ELEGOO or authorized ELEGOO distributors with a valid receipt or invoice.
B. Products that are lost or stolen.
C. Products whose warranty period has expired.
D. Free products or products that have been refunded.
E. Products repaired by a third party or modified by an individual.
F. Damage caused by external factors or misuse of products (including but not limited to resin leakage, falls, improper operation), normal discoloration, wear and tear, or other non-quality-related issues.
G. LCD screens that can not provide an identifiable SN code.
 
5. Warranty in Other Regions
For consumers protected by local consumer laws in their country of purchase, ELEGOO's Limited Warranty benefits are provided in addition to all rights and remedies under such laws, including but not limited to those described above. If local regulations specify a warranty period longer than our stated policy, the longer period will apply, and we will fully comply with local requirements to support our customers.

Return & Refund Policy

Non-Quality-Related Issues

Product Status
Items
Responsibility for Both Original Shipping Charges and Return Shipping Charges
Restocking Fee
Deduction Fee
Refund
Within 14 Days
Unopened
√
Customer
5% based on the order amount
If key parts are found missing on the returned machine, the corresponding fees will be deducted.
Open-box and unused
√
Customer
15% based on the order amount
Used
×
×
×
Within Warranty
All Status
×
×
×
×

Quality-Related Issues

Items
Responsibility for Fees
Refund
Replace
Repair
Return Shipping Charges
Repair Fees
Within 14 Days
√
√
√
Elegoo
Elegoo
Within Warranty
×
×
√
×
Elegoo
Out of Warranty
×
×
√
×
Customer

 

Important Notes:

1. These clauses do not apply to pre-owned or refurbished items.
2. All return requests must be approved by our official customer support team and be sent to our designated address as instructed. Unapproved returns may be rejected or lost, and we are not liable for such cases. Please confirm with customer support before returning to ensure safe processing.
3. The original item must be shipped within 7 days (return label is valid for 7 days) after return/replacement approval. Failure to do so will void the request, and later contact may require re-troubleshooting.
4. Please retain the original packaging to ensure your product is protected during transit. Deviating from our packaging instructions may void the warranty and incur additional charges. For warranty claims, the original box and packing materials are required to avoid processing delays.
5. The returned product will be thoroughly inspected by ELEGOO upon receipt to determine if it meets the inspection criteria. If the returned product fails to meet these criteria, your refund request may be rejected or subject to a deduction fee at ELEGOO's sole discretion.
6. Refunds or replacement products will be processed after we receive the returned item.

Features What's In Box Specification FAQs Reviews
Features What's In Box Specification FAQs Reviews

Tilt Release Technology

COB + Fresnel Collimating Lens

AI Monitoring

Mechanical Sensor

10-inch 12K Mono LCD

Auto Leveling

Tilt Release Technology

COB + Fresnel Collimating Lens

AI Monitoring

Mechanical Sensor

10-inch 12K Mono LCD

Auto Leveling

Tilt Release Technology, Ultra Fast Printing

The Elegoo Saturn 4 Ultra adopts tilt release technology, which enables the model to be peeled off from the release film quickly by tilting the resin tank, achieving a fast printing speed up to 150 mm/h.

Unmatched Details With 12K Mono LCD

With a 10-inch 12K mono LCD, the Saturn 4 Ultra boasts an incredible resolution of 11520 x 5120 and an XY resolution of 19 x 24μm, presenting you exquisite models with stunning clarity and precision.

COB & Fresnel Collimating Lens For Smoother Surface

With 92% light uniformity and precise beam control under 5°, the 405 nm COB light source and Fresnel collimating lens work in perfect harmony to deliver flawless results with ultra-smooth surfaces and sharp details.

Self-Check & Automatic LevelingPrint Right Out Of The Box

The Saturn 4 Ultra brings hassle-free experience with its smart self-check and automatic leveling function. Simply unbox, power on, and print—making it ultimate printing experience.

One-Click Self-Check
With one single click, the Saturn 4 Ultra will perform a quick self-check to verify whether its components are working properly before your printing starts.

One-Click Automatic Leveling
Thanks to its intelligent mechanical sensor, the build plate will be automatically leveled every time once you click the button, saving your time and efforts.

AI Camera Intelligent Detection, Minimize Potential Loss

Experience failure detection and real-time monitoring of the printing status with the AI camera. Stay informed about the progress of your prints and capture captivating time-lapse videos of your creations coming to life.

Smart Mechanical Sensor, Enjoy Worry-Free Printing

Equipped with a mechanical sensor, the Saturn 4 Ultra supports residue detection to prevent damage to the LCD screen, as well as resin shortage and leveling failure alarm to further enhance the safety and reliability during printing.

Real-Time Monitoring And Time-Lapse Photography

Keep updated on your print progress, ensuring everything is running smoothly. Capture captivating time-lapse videos of your creations and share the excitement with others.

User-Friendly Design

ELEGOO is committed to providing users a convenient printing experience. From the quick-release design of the build plate to the dual pour spouts design of the resin tank, along with the drip tray design to prevent resin drips, the replaceable tank lock, and the flip-up cover design for effortless access, every detail has been carefully considered to make your operation easier and more comfortable.

Easily manage multiple printers simultaneously from one device. Whether you have one or more printers, you can efficiently manage your print projects once at a time.

Powered by self-developed system with 8 GB ROM, which guarantees stable file transfer and faster computing, the Saturn 4 Ultra offers a smoother and more efficient printing experience.

Experience seamless and user-friendly operation with the 4-inch capacitive touch screen, designed with a vertical layout and an intuitive interface.

PFA release film offers superior release performance, as its non-stick surface prevents the resin from adhering to the film, making it easier to peel off.

The Elegoo Mars Mate air purifier's built-in high-density activated carbon filter can effectively absorb resin odor, with the purification efficiency up to 95% for TVOC.

Designed with a solid metal body, the Saturn 4 Ultra can maintain its precision even after millions of printing layers.

What's In Box

Saturn 4 Ultra 3D Printer

Saturn 4 Ultra 3D Printer

Wifi Antenna

Wifi Antenna

Build Plate

Build Plate

Buy Accessory
Resin Tank

Resin Tank

Buy Accessory
AI Camera

AI Camera

Resin Tray

Resin Tray

USB Flash Drive

USB Flash Disk

Gloves

Gloves

Mask

Funnel

Funnel

Buy Accessory
Backup Screws

Backup Screws

User Manual

User Manual

Adapter

Adapter

Tool Kit

Tool Kit

Scraper

Scraper

Show More（9+）

Specification

Build Volume

218.88 x 122.88 x 220 mm

Printing Speed

MAX 150 mm/h

Layer Thickness

0.01-0.2 mm

XY Resolution

19 × 24 μm (11520 × 5120)

Z-Axis Accuracy

0.02 mm

PRINTING TECHNOLOGY

MSLA

Light Source

COB Light source + Fresnel collimating lens

LCD SCREEN SIZE

10-Inch 12K Mono LCD

LCD SCREEN PROTECTOR

9H hardness tempered glass

CONNECTION METHOD

Wi-Fi, USB

System

EL3D-4.0

Slicer Software

Chitubox & Autodesk Fusion

OPERATING SCREEN

4.0-inch capacitive touch screen

Languages

Chinese, English, Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish, Portuguese

AIR PURIFIER

USB connection unavailable, compatible with Mars Mate air purifier

OTHER FUNCTIONS

Tilt Release Technology, One-Click Self-Check, One-Click Automatic Leveling, AI Camera (Empty Build Plate Detection/Warp Detection/Real-Time Monitoring & Time-Lapse Recording), Smart Mechanical Sensor (Resin Shortage Alarm/Residue Detection Alarm/Leveling Failure Alarm), Power-Loss Resume Printing

RESIN

Supports most resins on the market (water-washable, standard, ABS-like, plant-based, etc.)

Power Requirements

100-240V 50/60Hz 24V 6A

HEAT DISSIPATION METHOD

4 copper heat pipes + single fan

Dimensions

327.4 × 329.2 × 548 mm

NET WEIGHT

14.5 KG

GROSS WEIGHT

18.7 kg

Show More（16+）

FAQs

Is there a software license included with the Saturn 4 Ultra?

Yes, your purchase includes a 93-day free Chitubox Pro license.
How long does delivery take after shipping?

1. In-stock Product: 3-7 workdays for delivery

2. Pre-owned Product: 4-8 workdays for delivery

3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays for delivery.
What countries do you ship to?

Orders placed on ELEGOO CA (ca.elegoo.com) can be shipped to Canada.

Do you offer free shipping service?

Click to view Shipping Fees.
Can I change the delivery address of my package after it has been shipped out?

Unfortunately, we cannot change the shipment once the product is shipped.

 

Note: The Elegoo Saturn 4 Ultra is not compatible with flexible build plates. Installing flexible build plates may lead to automatic-leveling issues, inaccurate resin amount detection and may even cause damage the LCD screen. To maintain optimal performance and avoid any potential issues, please do not install flexible build plates on the machine.