• Fast Shipping
  • Up To 1-Year Warranty
  • Lifetime Support
Hot

Jupiter SE

$1,062.99 CAD $729.99 CAD
Shipping calculated at checkout.
  • 12.8-Inch 6K Mono LCD, 51um XY resolution
  • Build volume of 277.848 x 156.264 x 300 mm³
  • Automatic resin feeding and recycling
  • With a 4-point leveling system
  • Upgraded USB Air Purifier
  • Fast Shipping
  • Up To 1-Year Warranty
  • Lifetime Support
Jupiter SE
$1,062.99 CAD $729.99 CAD
$1,062.99 CAD $729.99 CAD
Product information

Where We Ship

Orders placed on ELEGOO CA (ca.elegoo.com) can be shipped to Canada.

Estimated Delivery Time:

  1. In-stock Product: 3-7 workdays for delivery.
  2. Pre-owned Product: 4-8 workdays for delivery.
  3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays.

Shipping Restrictions

  • Please note that we are unable to ship to P.O. Boxes and APO/FPO addresses.
  • You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.

Shipping Fees

For orders over $65 CAD, it’s FREE SHIPPING. Orders under $65 CAD will be charged a $20 CAD shipping fee. EXCEPT this condition:

Orders that include Saturn 4, Saturn 4 Ultra, or Saturn 4 Ultra 16K will incur a shipping fee of $30 CAD per unit.

Orders that include Centauri or Centauri Carbon will incur a shipping fee of $50 CAD per unit.

Ownership, Terms, and Risk

Please ensure your address details are correct as once the parcel is on its way we cannot re-direct it. It is your responsibility to check and verify. Should any loss be incurred due to the input of an incorrect address or a fraudulent transaction, you will be held responsible as the sole bearer of the pecuniary loss.

Note: Please do not enter any PO Box address, otherwise your package can’t be dispatched by any express.

Normally the orders that have been shipped out (you have received the tracking number or your order status has been completed) cannot be canceled. If you have to refuse delivery due to force majeure after the package is dispatched from ELEGOO, you are subject to the return and refund policies and must pay for the original shipping charges, which will be deducted from your refund.

If you do not contact the delivery company within 5 days after the delivery attempt, they may return the goods to us. A return charge may be assigned to us which may be twice of the delivery cost. If the case of this happens, we reserve the right to ask you to pay the return charge plus an additional re-delivery cost before we re-dispatch the item to you.

When the goods are delivered, please check that the order is complete and undamaged. If there is any damage to the goods at the point of delivery, you can contact us: info@elegoo.com

Following a successful transaction you will be notified when your order has been dispatched with a tracking number provided, if you do not receive a tracking number within 48 hours of completing your purchase, we ask that you first check your email “Junk/Spam” folder and then contact us: info@elegoo.com


Refund & Warranty

Thank you for your purchase. We hope you are satisfied with your product. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the warranty policy below, as warranty periods and conditions vary depending on the model and parts list.

 

Warranty Periods

Category Models Parts List Note Warranty Period
All / / Consumable parts with no warranty or limited warranty. 12 Months
3D Printing Machine & Parts Neptune 3/3 Pro/3 Plus/3 Max

Neptune 4/4 Pro/4 Plus/4 Max

OrangeStorm Giga

Centauri Carbon/Centauri		 PEI Platform Plate/PEI Platform Kit/PEI Magnetic Platform Kit/Build Plate/Nozzle (Kit)/PTFE Tube/Tools Consumable parts with no warranty. No Warranty
Extruder/Extruder Kit/Printhead Kit Consumable parts with limited warranty. 6 Months
Mars/Mars 2/2 Pro/3/3 Pro/4/4 MAX/4 DLP/4 Ultra/5/5 Ultra

Saturn S/2/8K/3/3 Ultra/4/4 Ultra/4 Ultra 16K

Jupiter/Jupiter SE		 Release Film, Tools Consumable parts with no warranty. No Warranty
LCD Screen Consumable parts with limited warranty. Resin leakage, scratch-resistant film damage, human-caused damage, and collision damage are not covered by the warranty. 3 Months
Resin Tank/Build Plate Consumable parts with limited warranty. 6 Months
Mercury
Mercury Plus V1.0/V2.0/V3.0
Mercury X/XS Bundle		 Washing Bucket, Curing Turntable, Acrylic Cover Consumable parts with no warranty. No Warranty
Phecda Laser
Engraver & 
Cutter - 10 W/20 W 		Consumables and
Other Attached		 Window Mirror, Power Cord, USB Cable, Engraving Materials, User Manual, Packaging, Tools Consumable parts with no warranty. No Warranty
Other Parts① Synchronous Belt, Motor Cable, Laser Cable Consumable parts with limited warranty. 3 Months
Other Parts② Fans Consumable parts with limited warranty. 6 Months

 

1. Consumable Parts 
Consumable parts are either excluded from warranty coverage or covered under a limited warranty period. For the purpose of this policy, "consumables" are defined as disposable items, components, or parts of the Product that are inherently designed to deteriorate or wear out during normal use of the Product.

While these items may not be covered by the standard warranty or may have a limited warranty period as specified in the table above, we will gladly replace any consumable that fails due to a manufacturing defect, provided the printer itself is still under warranty. ELEGOO reserves the exclusive right to determine eligibility for replacement, and such decisions shall be final.

2. Accessories or Parts Purchased Separately
Accessories or parts purchased separately enjoy the same quality assurance policy as the complete machine.

3. Warranty Periods
All periods stated on this page are calculated from the date the original order was received. 

4. Warranty Forfeiture
This warranty does not cover the following cases:
A. Products not purchased from ELEGOO or authorized ELEGOO distributors with a valid receipt or invoice.
B. Products that are lost or stolen.
C. Products whose warranty period has expired.
D. Free products or products that have been refunded.
E. Products repaired by a third party or modified by an individual.
F. Damage caused by external factors or misuse of products (including but not limited to resin leakage, falls, improper operation), normal discoloration, wear and tear, or other non-quality-related issues.
G. LCD screens that can not provide an identifiable SN code.
 
5. Warranty in Other Regions
For consumers protected by local consumer laws in their country of purchase, ELEGOO's Limited Warranty benefits are provided in addition to all rights and remedies under such laws, including but not limited to those described above. If local regulations specify a warranty period longer than our stated policy, the longer period will apply, and we will fully comply with local requirements to support our customers.

 

Return & Refund Policy

Non-Quality-Related Issues
Product Status Items Responsibility for Both Original Shipping Charges and Return Shipping Charges Restocking Fee Deduction Fee
Refund
Within 14 Days Unopened √ Customer 5% based on the order amount If key parts are found missing on the returned machine, the corresponding fees will be deducted.
Open-box and unused √ Customer 15% based on the order amount
Used × × ×
Within Warranty All Status × × × ×

 

 

Quality-Related Issues
Items Responsibility for Fees
Refund Replace Repair Return Shipping Charges Repair Fees
Within 14 Days √ √ √ Elegoo Elegoo
Within Warranty × × √ × Elegoo
Out of Warranty × × √ × Customer

 

Important Notes:

1. These clauses do not apply to pre-owned or refurbished items.
2. All return requests must be approved by our official customer support team and be sent to our designated address as instructed. Unapproved returns may be rejected or lost, and we are not liable for such cases. Please confirm with customer support before returning to ensure safe processing.
3. The original item must be shipped within 7 days (return label is valid for 7 days) after return/replacement approval. Failure to do so will void the request, and later contact may require re-troubleshooting.
4. Please retain the original packaging to ensure your product is protected during transit. Deviating from our packaging instructions may void the warranty and incur additional charges. For warranty claims, the original box and packing materials are required to avoid processing delays.
5. The returned product will be thoroughly inspected by ELEGOO upon receipt to determine if it meets the inspection criteria. If the returned product fails to meet these criteria, your refund request may be rejected or subject to a deduction fee at ELEGOO's sole discretion.
6. Refunds or replacement products will be processed after we receive the returned item.

Features What's In Box Specification FAQs Reviews
Features What's In Box Specification FAQs Reviews

12.8" 6K Mono LCD

Spacious
Build Volume

Stable Movement Structure

Efficient Cooling System

Stunning Clarity
and Sharpness

Automated Resin
Management System

12.8" 6K Mono LCD

Spacious
Build Volume

Stable Movement Structure

Efficient Cooling System

Stunning Clarity
and Sharpness

Automated Resin
Management System

12.8" 6K Mono LCD

Jupiter SE comes with a 12.8-inch 6K monochrome LCD, boasting a resolution of 5448×3064 and 51-micron XY resolution, which ensures that every intricate detail of your designs is accurately captured, resulting in stunningly precise prints.

Spacious Space for Your Projects

With a build volume of 277.848 x 156.264 x 300 mm³/10.94x6.15x11.81 inches, this provides you ample space for more ambitious projects.

You can print larger models or multiple parts in a single batch, making it ideal for professional or commercial use.

Automated Resin Management System

Jupiter SE is designed with an automatic resin feeding and recycling device that ensures a continuous supply of resin during the printing process.

Automatic resin recycling ensures that the unused resin is collected and recycled for future use, reducing waste and saving you money.

COB +Refractive Light Source

The printer adopts a COB+refractive light source that reduces light dispersion and provides uniform and consistent light exposure, resulting in sharper details, smoother final prints, and accurate dimensions.

Efficient Cooling System

There are cooling fans and heat-conducting copper tubes on both sides of the COB light source for efficient heat dissipation, maintaining a stable temperature during the printing process to extend the service life of the printer.

Hassle-free Slicing

Jupiter SE is compatible with Tango and ChituBox. You can choose from these different slicing tools for your 3D printing needs.

The Z-axis dual linear guide rail with an accuracy of 0.02mm, ensures stable and precise Z-axis movement during the printing process.

The build plate comes with a 4-point leveling system and laser-carved surface, which provides excellent adhesion during printing and no need to repeat leveling after leveling once. The rotary handle makes it easy to install and remove the build plate.

The laser-carved build plate ensures better adhesion during printing and easier removal of prints after printing is done.

What's In Box

JUPITER SE 3D Printer

USB Air Purifier

Buy Accessory

Build Plate

Buy Accessory

Resin Tank

Buy Accessory

Funnel

Buy Accessory

Auto Resin Feeding Main Module

Bottle Cap Module*2

Cover Handle*2

Mask&Gloves

Scraper

U Disk

Adapter

Backup Screws

Tool Kit

User Manual

Show More（9+）

Specification

Build Volume

277.85 x 156.26 x 300 mm³

Printing Speed

MAX 70mm/h

Layer Thickness

0.01-0.2mm

XY Resolution

51 x 51 μm (5448 x 3064)

Z Axis Accuracy

0.02mm

PRINTING TECHNOLOGY

MSLA

Light Source

COB+Refractive Light Source

LCD SCREEN SIZE

12.8-inch 6K Mono screen

LCD SCREEN PROTECTOR

PET scratch-resistant film

CONNECTION METHOD

USB offline printing

System

EL3D-3.0.1

Slicer Software

Chitubox & Voxeldance Tango

OPERATING SCREEN

3.5-inch Resistive Touch Screen

Languages

Chinese, English

AIR PURIFIER

Plug-in

OTHER FUNCTIONS

Automatic Resin Feeding and Recycling

RESIN

Supports most resins on the market (water-washable, standard, ABS-like, plant-based, etc.)

Power Requirements

100-240V 50/60 Hz 24V 7.5A

HEAT DISSIPATION METHOD

Double fans

DIMENSIONS

479.9 x 377.4 x 657.5 mm³

NET Weight

19.5KG

GROSS WEIGHT

26.6 kg

Show More（16+）

FAQs

How long does delivery take after shipping?

1. In-stock Product: 3-7 workdays for delivery

2. Pre-owned Product: 4-8 workdays for delivery

3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays for delivery.
What countries do you ship to?

Orders placed on ELEGOO CA (ca.elegoo.com) can be shipped to Canada.

Do you offer free shipping service?

Click to view Shipping Fees.
Can I change the delivery address of my package after it has been shipped out?

Unfortunately, we cannot change the shipment once the product is shipped.