Product information
Where We Ship
Orders placed on ELEGOO CA (ca.elegoo.com) can be shipped to Canada.
Estimated Delivery Time:
- In-stock Product: 3-7 workdays for delivery.
- Pre-owned Product: 4-8 workdays for delivery.
- Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays.
Shipping Restrictions
- Please note that we are unable to ship to P.O. Boxes and APO/FPO addresses.
- You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.
Shipping Fees
For orders over $65 CAD, it’s FREE SHIPPING. Orders under $65 CAD will be charged a $20 CAD shipping fee. EXCEPT this condition:
Orders including Saturn 4 or Saturn 4 Ultra will be charged $30 CAD/pc shipping fees.
Ownership, Terms, and Risk
Please ensure your address details are correct as once the parcel is on its way we cannot re-direct it. It is your responsibility to check and verify. Should any loss be incurred due to the input of an incorrect address or a fraudulent transaction, you will be held responsible as the sole bearer of the pecuniary loss.
Note: Please do not enter any PO Box address, otherwise your package can’t be dispatched by any express.
Normally the orders that have been shipped out (you have received the tracking number or your order status has been completed) cannot be canceled. If you have to refuse delivery due to force majeure after the package is dispatched from ELEGOO, you are subject to the return and refund policies and must pay for the original shipping charges, which will be deducted from your refund.
If you do not contact the delivery company within 5 days after the delivery attempt, they may return the goods to us. A return charge may be assigned to us which may be twice of the delivery cost. If the case of this happens, we reserve the right to ask you to pay the return charge plus an additional re-delivery cost before we re-dispatch the item to you.
When the goods are delivered, please check that the order is complete and undamaged. If there is any damage to the goods at the point of delivery, you can contact us: info@elegoo.com
Following a successful transaction you will be notified when your order has been dispatched with a tracking number provided, if you do not receive a tracking number within 48 hours of completing your purchase, we ask that you first check your email “Junk/Spam” folder and then contact us: info@elegoo.com
Refund Policy & Warranty Info
Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the warranty policy below, as warranty periods and warranty rules differ according to the models and parts list.
Warranty Policy
1. Warranty timeline
Models | Parts List | Warranty Period | |
3D Printing Related Products |
Neptune 3 OrangeStorm Giga |
PEI Platform Plate, Nozzle, Heater, Thermistor, PTFE Tube, Tools | No Warranty |
Hot End | 3 Months | ||
Extruder Kit | 6 Months | ||
Main Parts of the Machine | 12 Months | ||
Jupiter | Release Film, Tools | No Warranty | |
LCD Screen | 3 Months | ||
Resin Tank, Build Plate | 6 Months | ||
Other Main Parts of the Machine | 12 Months | ||
Mars 2/2 Pro/3/3 Pro/4/4 MAX/4 DLP/4 Ultra/5/5 Ultra Saturn S/Saturn 2/Saturn 8K/3/3 Ultra/4/4 Ultra Jupiter SE |
Release Film, Tools | No Warranty | |
LCD Screen, Resin Tank, Build Plate | 6 Months | ||
Other Main Parts of the Machine (FEP&Tools Excluded) | 12 Months | ||
Mercury Mercury Plus V1.0/V2.0/V3.0 Mercury X/XS Bundle |
Main Parts of the Machine (Tools Excluded) | 12 Months | |
PHECDA LASER ENGRAVER & CUTTER- 10w/20W |
Main Parts | PCB, Motor, Laser head, Power Adapter | 12 Months |
Other Parts① | Fans | 6 Months | |
Other Parts② | Synchronous belt, motor connection line, laser connection line | 3 Months | |
Consumables and Other attached |
Power cord, USB cable, Engraving Material (filter cartridge, wood board, stainless steel sheet, leather, etc.), user manual, packaging, tools (hexagonal wrench, open-end wrench), etc. | No Warranty | |
Arduino Kits, Robot Kits & Component Kits | All | All | 12 Months |
Pre-owned Products | All | All | No Warranty |
Accessories (For individual purchases) | Release Film:FEP/PFA/ACF | Release film is a consumable product without warranty | No Warranty |
LCD Screen: Mars/Jupiter |
Resin leakage, scratch-resistant film damage, human damage, collision damage are not included in the warranty. | 3 Months | |
LCD Screen: Saturn /S/2/8K/3/3 Ultra/4/4 Ultra Jupiter SE |
Resin leakage, scratch-resistant film damage, human damage, collision damage are not included in the warranty. | 6 Months | |
Build Plate | Damage caused by scratches, drops or bumps is not covered by the warranty. | 6 Months | |
Resin Tank | Installation tools and screws are not warranted | 6 Months | |
Air Purifier: Mini/USB/Mars Mate |
Consumables (activated carbon) are not warranted, as well as human damage, disassembly is not covered by the warranty. | 12 Months | |
Mini Heater | Consumables (activated carbon) are not warranted, as well as human damage, disassembly is not covered by the warranty. | 12 Months | |
Washing Bucket:Mercury Plus V1.0/ V2.0Mercury X/XS Bundle | No warranty for damage caused by man / misuse (e.g. resin curing inside the bucket). | 6 Months | |
3D Stainless Steel Funnel | 3D Stainless Steel Funnel is a consumable product without warranty | No Warranty | |
PEI Platform Kit/PEI Magnetic Platform Kit | PEI Platform Kit is a consumable product without warranty | No Warranty | |
Nozzle Kit | Nozzle Kit is a consumable product without warranty | No Warranty | |
PTFE Tube | PTFE Tube is a consumable product without warranty | No Warranty | |
Hotend Kit | Hotend Kit (Nozzle, PTFE Tube Excluded) | 3 Months | |
Extruder Kit/Printhead Kit | Entire Dual-Gear Direct Extruder Kit | 6 Months | |
Cooling Fan Kit | Including 4010/4015 Blower Fan and 6010 Axial Flow Fan | 12 Months | |
STM 32-bit Silent Motherboard | Motherboard | 12 Months | |
Enclosure | All | 12 Months | |
Dual Printhead Mounting Plate | All | 12 Months | |
Four-Printhead Mounting Plate | All | 12 Months | |
5KG Large Spool Holder Kit | All | 12 Months | |
Camera | All | 12 Months | |
Filament Vacuum Storage Bags Kit | The pump is guaranteed for 1 month and the vacuum bag is a consumable product without warranty. | 1 Month | |
Rotary Attachment: PHECDA Laser Engraver |
All | 12 Months | |
10W/20W Air Assist:PHECDA Laser Engraver | All | 12 Months | |
Enclosure:PHECDA Laser Engraver | All | 12 Months | |
Honeycomb Panel: PHECDA Laser Engraver |
Honeycomb Panel is a consumable product without warranty | No Warranty | |
Raisers:PHECDA Laser Engraver | All | 12 Months | |
Composite Filter:PHECDA Laser Engraver | Composite Filter is a consumable product without warranty | No Warranty | |
10W/20W Laser Module:PHECDA Laser Engraver | All | 12 Months | |
Window Mirror:PHECDA Laser Engraver | Window Mirror is a consumable product without warranty | No Warranty | |
20W Adapter:PHECDA Laser Engraver | All | 12 Months | |
Metal Business Cards | All | No Warranty | |
Silicone Mat | All | No Warranty |
2. Warranty Rules for Laser Head and Tube
-
Laser Head WarrantyRules:
The rate of laser power drop is related to the frequency of use, working hours, and working environment.
Laser Tube Warranty Rules:
a). If the laser tube is found to be damaged during the first unpacking inspection, after-sales warranty service can be provided normally;
b). During the warranty period, if the laser tube cannot emit light normally, but no obvious appearance defects are found, after-sales warranty services can be provided normally;
c). During the warranty period, if the laser tube has any appearance cracks (including but not limited to cracks caused by improper handling or cracks caused by freezing temperatures), after-sales warranty services can't be provided normally.
3. Warranty Period
All times shown on this page are calculated from the date the original order was received. If you receive free replacement products or accessories, the warranty period will still be calculated from the date the original order was received.
4. Warranty Forfeiture
The following Conditions Are Not Covered Under Warranty:
- Products without sufficient proof of purchase
- Lost or stolen products
- Items that have expired their warranty period
- Non-quality-related issues (after 30 days of purchase)
- Free products
- Repairs through 3rd parties
- Damage from outside sources
- Damage from misuse of products (including, but not limited to: falls, extreme temperatures, water, and operating devices improperly)
- Purchases from illegitimate resourcesor second-handed parties
- Normal discoloration, wear, or consumption during product use.
Return & Refund Policy
1. For Unwanted Items
*This clause does not apply to Pre-owned & Refurbished items.
If the Elegoo product that you purchased does not meet your satisfaction but was not confirmed defective by certified Elegoo technicians, we call such product as “unwanted product”.
- For products in condition unopened (all original tags and labels attached), within 14 days of delivery, you may return them with an "unwanted reason" and get a refund. You are responsible for the shipping fees, and ELEGOO will charge a 5% restocking fee based on the order amount.
- For products in condition open-box and unused, within 14 days of delivery, you may return them with an "unwanted reason" and get a refund. You are responsible for the shipping fees, and ELEGOO will charge a 15% restocking fee based on the order amount.
- For used products or orders beyond 14 days, refunds for unwanted products are not available.
Unwanted Issue |
|||||
|
Product Status |
Items |
Responsibility of Return Shipping Charges |
Restocking Fee |
Deduction Fee |
Refund |
|||||
Within 14 Days |
Unopened |
√ |
Customer |
5% based on the order amount |
If the returned machine detects key parts missing, the corresponding fees will be deducted. |
Open-box and unused |
√ |
Customer |
15% based on the order amount |
||
Used |
× |
× |
× |
||
Within Warranty |
All Status |
× |
× |
× |
× |
Important: After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.
For your own benefit, we recommend that you use a traceable carrier that can provide you with the delivery confirmation to ship your Product for refund back to the location instructed in the RMA authorization. Elegoo shall not be responsible for any loss or damage to the returning product caused in transit.
The returning product will be thoroughly inspected by Elegoo when received and a decision will be made whether the inspection criteria are met. If your returning product fails to satisfy the inspection criteria and has been shipped to Elegoo, your non-conforming product for refund will be rejected or subject to a deduction fee at Elegoo’s sole discretion.
After the 14-day refund window has expired, your only recourse regarding the products is through our warranty.
2. For Quality-Related Items
*This clause does not apply to Pre-owned & Refurbished items.
- Product is defective when you receive it, within 14days of delivery, you can return defective items to Elegoo and get a full refund or replacement, and Elegoo is responsible for return shipping charges. Or you can ask Elegoo to repair defective items, and Elegoo is responsible for repair fees.
- Beyond the 14days but within warranty, a full refund and replacement are not available, but repair is acceptable. Elegoo is responsible for repair fees.
- Out of warranty, Elegoo will provide free technical support, if the parts need to be replaced, the customer is responsible for the repair fees, which means the customer needs to purchase the parts and bear the freight.
Quality-Related Issue |
|||||
|
Items |
Responsibility of Fees |
|||
Refund |
Replace |
Repair |
Return Shipping Charges |
Repair Fees |
|
Within 14 Days |
√ |
√ |
√ |
Elegoo |
Elegoo |
Within Warranty |
× |
× |
√ |
× |
Elegoo |
Out of Warranty |
× |
× |
√ |
× |
Customer |
Important: 1. After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.
2. To avoid any delay or denial of processing your refund and replacement request, please verify that the returning product must be with all parts & accessories included and all original tags and labels attached and in the original box (generic boxes will be rejected).
3. Process After Returning Product
After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least 7 days from the receipt of your item to process your return. We will notify you by email when your return has been processed and move to the next warranty process, refund you the payment via Paypal, or send a new replacement to you.
Contact Us
Regarding product issues, please don't hesitate to contact us at the customer service channels below to acquire technical support, refund or exchange.
- For 3D Printertechnical support: 3dp@elegoo.com
- Forlaser engraver technical support: lec@elegoo.com
- For order issues, unwanted item refunds, or returns: info@elegoo.com
- For STEM kits, robots technical support: service@elegoo.com
When contacting our customer service team, the buyer must provide sufficient proof of purchase (the order number from online purchases made through ELEGOO, Amazon, or other ELEGOO's authorized resellers), tell us which product you purchased, and describe the problem as clearly as possible through text, images or short videos. This will help our team to process your inquiries and help you solve the problems more efficiently.
Tilt Release Innovation
Tilt Release Innovation
Stunning 9K, True-to-Life
Stunning 9K, True-to-Life
Tilt Release Innovation
Tilt Release Innovation
Self-Check &
Auto Leveling
Self-Check &
Auto Leveling
Smart Mechanical Sensor
Smart Mechanical Sensor
Power-Loss Resume Printing
Power-Loss Resume Printing
Stunning 9K, True-to-Life
Stunning 9K, True-to-Life
AI Camera Keeps You
in Total Control
AI Camera Keeps You
in Total Control
Tilt Release Innovation, Blazing Fast
Boasting a blazing fast speed of up to 150mm/h, the Mars 5 Ultra leaves competitors in the dust. Its revolutionary tilt release technology enables swift model peeling from the release film, ensuring lightning-fast printing without compromising on detail, accuracy or reliability. Seamlessly switch between the fast and slow print modes, unlocking unmatched flexibility and efficiency.
Stunning 9K , True-to-Life
Featuring a 7" mono LCD with 9K ultra-high resolution and 18μm XY resolution, the Mars 5 Ultra ensures the faithful reproduction of every intricate detail with stunning fidelity and breathtaking textures. Boasting 92% light uniformity, the advanced COB light source ensures consistent results, bringing your visions to life with impeccable precision.
Self-Check & Automatic Leveling , Plug-N-Play
With its smart self-check and automatic leveling functions, the Mars 5 Ultra allows all skill levels to dive straight into the creative process. No more setup hassles or tedious calibrations - simply unbox, power on, and print.
One-Click Self-Check
With one single click, the Mars 5 Ultra will perform a quick self-check to verify whether its components are functioning properly before printing. When the accumulated usage of the release film is approaching 60,000 times, the device will issue a reminder to replace the release film promptly.
*After replacing the release film, please click the refresh button on the device self-test page to reset the counter manually.
One-Click Automatic Leveling
Effortless precision is just a click away. Thanks to its intelligent mechanical sensor, the build plate can be automatically leveled with a simple click, making 3D printing accessible to users of all experience levels.
AI Camera Acts as Your Eyes, Stay in Total Control
Say goodbye to costly failures and wasted time as the AI camera detects errors in real-time, guiding you to flawless results. Never worry about empty build plate or model warps again - it's a thing of the past. The AI camera monitors every step, instantly alerting you to any errors for immediate resolutions.
Print Smarter , Print Worry-Free
With a smart mechanical sensor, the Mars 5 Ultra supports residue detection to prevent damage to the LCD screen. Plus, timely alarms for resin shortages and leveling failures minimize waste and ensure uninterrupted efficiency. Stay worry-free and enjoy high-quality prints every time.
Real-Time Monitoring and Time-Lapse Photography
Effortlessly monitor the printing process in real-time, troubleshoot issues, and ensure exceptional print quality. Capture stunning time-lapse videos and share your creative journey with ease.
Advanced Overheat Protection
No more overheating worries. Enjoy carefree printing with the advanced high temperature protection. When the LED temperature exceeds 80℃, the intelligent system triggers an alarm and halts printing automatically, ensuring enhanced safety and extended lifespan.
Power-Loss Resume Printing
Power Outages? No Problem. The Mars 5 Ultra will automatically resume printing from where it stops. Say goodbye to wasted materials or time. Never again will you lose the printing progress.
User-Friendly Design
Quick-Release Design, Easy Assembly
The quick-release design of the build plate enables effortless removal and installation, making cleaning and maintenance a breeze.
Replaceable Lock Screws, Resin Clog-Free
No more resin clogs hindering your creative flow with the replaceable resin tank lock screws. Enjoy uninterrupted printing perfection every time.
Dual Pour Spouts Resin Tank, Smooth Pouring
Double the convenience, double the speed. The resin tank features dual pour spouts, allowing for quick and easy loading and unloading, maximizing your efficiency.
Reliable Drip Tray, Clean and Safe
The reliable drip tray effectively prevents your resin from spilling, maintaining a clean workspace and enhancing safety. Enjoy a seamless printing experience without any messy surprises.
Redefine efficiency and streamline your workflow with seamless control over multiple printers from one device. Harness the power of synchronized prints to supercharge your productivity and conquer ambitious projects with ease.
Powered by self-developed system with 8G ROM, which ensures faster computing and stable file transfer, the Mars 5 Ultra offers a smoother and more efficient printing experience.
Experience 3D printing that's as easy as scrolling through your smartphone. The 4-inch capacitive touch screen features a simple, intuitive interface that guides you through every step, effortless even for first-timers.
Trust the Mars 5 Ultra's robust metal frame to withstand the test of time. With meticulous engineering, it is designed to endure countless printing hours while maintaining exceptional print quality and reliability.
The LCD screen is safeguarded by a durable 9H tempered glass protector, providing exceptional resistance to scratches and damage for a worry-free printing experience.
Laser-engraved build plate features superior adhesion, preventing detachment and warping issues during printing, and ensuring effortless and damage-free removal of printed models.
No longer will you be bound by generic exposure settings. Imagine having the ability to finely tune the exposure time for each section, enabling you to determine the optimal exposure time, meticulously control and enhance the printing results.
The Elegoo Mars Mate air purifier's built-in high-density activated carbon filter can effectively absorb resin odor, with the purification efficiency up to 95% for TVOC.
What's In Box
Mars 5 Ultra 3D Printer
Wifi Antenna
Build Plate
Buy AccessoryResin Tank
Buy AccessoryAI Camera
Resin Tray
USB Flash Disk
Mask
Gloves
Funnel
Buy AccessoryBackup Screws
User Manual
Adapter
Tool Kit
Scraper
Specification
BUILD VOLUME
153.36 x 77.76 x 165 mm³
PRINTING SPEED
MAX 150mm/h
LAYER THICKNESS
0.01-0.2 mm
XY RESOLUTION
18x18μm (8520x4320)
Z-AXIS ACCURACY
0.02 mm
PRINTING TECHNOLOGY
MSLA
LIGHT SOURCE
COB Light Source (wavelength 405nm)
LCD SCREEN SIZE
7-inch 9K mono LCD
LCD SCREEN PROTECTOR
9H hardness tempered glass
CONNECTION METHOD
USB Interface & WiFi
SYSTEM
EL3D-4.0
SLICING SOFTWARE
Chitubox
OPERATING SCREEN
4.0-inch Capacitive Touch Screen
LANGUAGE
Chinese, English, Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish, Portuguese
AIR PURIFIER
USB connection unavailable, compatible with Mars Mate air purifier
OTHER FUNCTIONS
Tilt Release Technology,
One-Click Automatic Leveling,
Self-Check & Overheat Protection,
AI Camera (Empty Build Plate Detection, Warp Detection, Real-Time Monitoring, Time-Lapse Recording),
Smart Mechanical Sensor (Resin Shortage Alarm, Residue Detection Alarm, Leveling Failure Alarm),
Power-Loss Resume Printing.
RESIN
Supports most resins on the market (water-washable, standard, ABS-like, plant-based, etc.)
POWER REQUIREMENTS
100-240V 50/60 Hz 24V 3A
HEAT DISSIPATION METHOD
3 copper heat pipes + single fan
DIMENSIONS
260 x 268 x 451.5 mm³
NET WEIGHT
8.8 kg
GROSS WEIGHT
10.8 kg
FAQs
Is there a software license included with the Mars 5 Ultra?
Yes, your purchase includes a 93-day free Chitubox Pro license.
How long does delivery take after shipping?
1. In-stock Product: 3-7 workdays for delivery
2. Pre-owned Product: 4-8 workdays for delivery
3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays for delivery.
What countries do you ship to?
Orders placed on ELEGOO CA (ca.elegoo.com) can be shipped to Canada.
Do you offer free shipping service?
Click to view Shipping Fees.
Can I change the delivery address of my package after it has been shipped out?
Unfortunately, we cannot change the shipment once the product is shipped.