Blog

All
No Response When Booting The Printer
No Response When Booting The Printer

Step 1: Check if the indicator light of the power adapter is on. If so, go to Step 2. Step 2: Dis...

Read more
ELEGOO Mars: ChiTu Slicer Setting Instruction
ELEGOO Mars: ChiTu Slicer Setting Instruction

STEPS: Step 1: Click the third command button on the left, and enter a value within 100 in the pe...

Read more
ELEGOO Mars: Assemble the Platform
ELEGOO Mars: Assemble the Platform

If your Mars printer needs to assemble the platfrom, please follow the steps below: Tools you nee...

Read more
Lines or Layer Shifting on The Printed Model
Lines or Layer Shifting on The Printed Model

If you got lines or layer shifting on your printed models from ELEGOO Mars or Saturn series 3D p...

Read more
Buildplate Continues to Press down The LCD After Reaching The Bottom (Not identify "HOME")
Buildplate Continues to Press down The LCD After Reaching The Bottom (Not identify "HOME")

When you encountered this "Buildplate Continues to Press down The LCD After Reaching The Bottom" ...

Read more
Print Falls from The Support or Part of The Print Is Missing
Print Falls from The Support or Part of The Print Is Missing

When you encountered this "Print Fells from The Support or Part of The Print Is Missing" problem,...

Read more
What to Do After A Failed Print
What to Do After A Failed Print

If the printing fails, please do not start your next print immediately. 1. First use our plastic...

Read more
Holes in The 3D Printed Model
Holes in The 3D Printed Model

If you got holes in your 3D printed model, please follow the steps below: Original Mars and Mars ...

Read more
1 2